Hello,
in Humax 5400 is factory a nose to also eliminate I please all proudly owners of the Humax to speilen around errors. Over to determine whether a Tuner is nose or firmware nose must it, to certain radio transmitter switch and wait par minutes whether this radio transmitter in the clay/tone an interruption of par minutes to have. Please divide with which Humax have you (with Z, without, which more loader, designation at the Main board).
EutelsatW2 16 grad, 12525 H, SR 30000 3/4, test would drive out at the following radio the transmitter (wait they par minutes to clay/tone away is):
Romski Radio, Kiss Radio Minhen, Radio Grand, Kiss Doina Vlaski, Vip Radio, Radio Glas Drine, Vikom RTV Banja Luka, Radio Svet plus, Posavski radio, Radio s Beograd, Radio Posavina, Radio Biser usw.
These 4 radio transmitter under same frequency does not have a problem: Radio1, Ognjisce Radio Slo, Stil Radio i NTH test2

I believe am affected not all version by the Humax....

"Your observation is correct! After some time the sound signal breaks off, and one sees the message on the picture monitor: " The program sends not or is scrambled" ; and after some time the clay/tone (for short time) returns, until it breaks off again. I have a Humax 5400 (without Z) with board OAKII, Tuner SD 1228/L-MK3, Loader H2.08 and system ID 0016.0600. Probably does this problem have something with the very low (to low?) Bit rate of the radio stations to do (64 kbps); so has e.g. Radio 1, where this problem does not arise at all, a much higher bit rate (256 kbps); one knows the bit rate itself in the assistance window (key "? ") to indicate leave. I would make myself however no hope that it will firmware-fixed give for this one"


Also a trick can make man it these radio stations work, e.g. Vip radio (and the same with all radio stations with error, Pcr pid change).
Print menu gropes:
1) Instalation
2) Service Searching
3) Advanced Search
4) Video pid automatic Audio pid 4053 Pcr pid 4053 and OK ONES scan.
He finds radio transmitter as (USER), then only unbenemen and is all OK ONE. Now it ask does why with manual do not look for folds that, the Humy finds radio transmitter with names however PCR pid is then 8190 and because of the transmitter with interruption runs???? Those rolls plays also Service ID must be deleted, suns hollt ServID again old PCRPID.

What language is your message in?